System Specification and Accessories

Post systems

Square posts, I-posts and H-beams are post systems for the high-security range. Panel mesh is specified separately.

square post 60 x 60 / 80 x 80 / 100 x 100 mm
I-post 44 x 70 / 55 x 100 mm
H-beam 100 x 55 / 150 x 150 mm
Project default ≈ 60 x 80 x 2.5 x 3600 mm + flat bar

Mesh and panels

358 anti-climb / 2D 4/6/4 welded mesh, aperture approx. 76.2 x 12.7 mm. Panel heights are confirmed against the site requirement before quotation.

Coating

Hot-dip galvanised to EN ISO 1461 is the primary coating standard, with optional polyester powder coating over zinc in catalogue RAL colours.

RAL 1028 Melon Yellow
RAL 6005 Moss Green
RAL 9005 Jet Black
RAL 7016 Anthracite Grey
RAL 9016 Traffic White

Posts, clamps and accessories

Post and fixing sets are supplied with the panels as one package.

Square project posts 60 x 80 x 2.5 x 3600 mm
Flat bar 60 x 5 clamps
Angle 40 x 40 x 4 fixings
Security fasteners, post caps and base plates
Security bolts / breakaway nuts (M8) — M8 security bolts, breakaway nuts and washers; supplied with the post-and-fixing set; fabricated steel HDG EN ISO 1461

Toppings

BTO-22 razor tape, concertina coils, barbed wire and angled barbed arms are available as toppings for high-security perimeters, specified per site risk assessment.

square post with 358 mesh and flat-bar fixings, hot-dip galvanised — square post 60 x 60 / 80 x 80 / 100 x 100 mm

I-post with spider clips and welded mesh, hot-dip galvanised — I-post 44 x 70 / 55 x 100 mm

H-beam post with bolted mesh panels, hot-dip galvanised — H-beam 100 x 55 / 150 x 150 mm

Technical specification — 358 system

Panel class	358 / anti-climb · 2D 4/6/4 · mesh ≈ 76.2 × 12.7 mm
Manufacturer certifications	ISO 9001 / 14001 / 45001 · CE on request
Project posts / fixings	60 × 80 × 2.5 × 3600 mm + flat bar 60 × 5 + angle 40 × 40 × 4 + BTO-22
Coating	Hot-dip galvanised, HDG EN ISO 1461
Gates	Pedestrian · swing · sliding
Optional topping	BTO-22 razor tape
BTI / customs	BTI application submitted / pending national reference (not approved) · CN 7308 90 98 90 · CPV 45340000

Heights, post spacing and gate leaves are configured per project drawing. Other product groups are specified on the same basis. Prices are quoted per project — no public price list.

Security bolts / breakaway nuts (M8)

M8 security bolts, breakaway nuts and washers; supplied with the post-and-fixing set; fabricated steel HDG EN ISO 1461.

Coatings and colours

Standard supply is hot-dip galvanised (HDG, EN ISO 1461). Polyester powder coating over zinc is available to catalogue RAL colours:

Other RAL shades on request if the factory can match them.

Order panels, barbed wire, posts or other single products. A full project quote is optional.

Request project quote

System specification