358 high-security fencing358 anti-climb welded mesh with flat panels, mesh aperture approximately 76.2 × 12.7 mm, so there is no finger or tool hold. The lead system for substations and critical infrastructure where delay-to-entry and clear sightlines both matter.
2D welded mesh fencingTwin-wire welded mesh panels with horizontal wire pairs either side of the vertical wire, giving a rigid panel that needs no mid-span rail. Used for industrial, utility and logistics perimeters where a clean, low-maintenance boundary is required.
Decorative twin-wire fencingDouble-wire welded mesh panel with a decorative pattern along the top edge that adds to the anti-climb effect. High-strength galvanised wire, same post range as 2D, for public-facing boundaries.
3D welded mesh fencingSingle-wire welded mesh panels stiffened by horizontal V-profiles, a practical boundary for commercial sites, schools, parks and logistics yards. Wide height range and colour options over galvanising.
Chain link fencingWoven wire chain link on line posts with straining wires and corner bracing, supplied in roll form for long boundaries. An adaptable enclosure for utility plots, storage areas and site boundaries.
Palisade fencingVertical steel pales bolted to horizontal rails, with triple-point or round pale heads for a hostile top line. Specified where an aggressive visual deterrent is wanted alongside good sightlines.
Steel tubular fencingWelded tubular steel panels and railings for representative boundaries, entrances and public areas. Combines a formal appearance with the same galvanised and coated durability as the security range.
Roll top fencingWelded mesh panels finished with a rolled top and bottom edge, removing sharp wire ends and adding rigidity. Common on sports grounds, schools and public sites where safety of the top edge matters.
Temporary construction fencingFree-standing mobile panels with feet and couplers for construction sites and events, deployed and relocated without groundworks. Reusable across projects and available with gates and debris netting.
Edge protection fencingMesh edge protection and guard rail systems for slab edges, openings and excavation perimeters on active construction sites. Panels are held in sockets or clamps and removed as the works progress.
Crowd control barriersInterlocking steel barriers for event lines, road works and public safety zones, stacking flat for storage and transport. Bridge feet and flat feet versions are configured per event or site use.
Stadium and sports fencingBall-stop and spectator separation fencing for pitches, courts and stadium perimeters, with rolled edges and reinforced posts. Heights and gate positions follow the sports facility layout.
Security gatesPedestrian, single swing, double swing and sliding gates built in the same mesh and coating as the fence run. Hinges, locks, drop bolts and provision for operators are agreed at drawing stage.
Gabion retaining wallsWelded gabion baskets filled with stone on site for retaining walls, level changes, noise screening and vehicle stand-off. Basket size, wire diameter and coating follow the structural requirement.- Farm fencingFarm fencing for fields, pastures, horse paddocks and poultry runs. Field mesh, poultry wire and gates supplied per drawing.
Defensive barriersCollapsible wire-mesh and geotextile cellular barriers filled with soil or aggregate for protective walls and stand-off perimeters. Deployed quickly on prepared ground and stacked where height is needed.
Workshop safety fencingModular mesh partitions for production halls, warehouses and storage cages, with hinged and sliding doors. Panels bolt to floor-fixed posts and can be relocated as the layout changes.
Machine guardingMesh guarding around machines, robot cells and conveyors, with access doors, interlock provision and service panels. Panel pitch and post spacing follow the safety distance required by the risk assessment.
Electric fencePerimeter electric fence lines with energisers, insulators and warning signage, combined with mesh fencing for detection and deterrence. Used on utility, storage and agricultural-industrial sites.
Razor and barbed wireBTO-22 razor tape, concertina coils, barbed wire and barbed arms, supplied standalone or as toppings for high-security perimeters. Fitted on straight or angled arms according to the site risk assessment.
Privacy fencingPrivacy screening fitted within a welded-mesh boundary panel to shield an outdoor garden or site edge. The panel, infill and fixing arrangement are specified together to suit the location.
Applications
Airport fencingAirside boundary perimeters using anti-climb mesh, high panels, toppings and detection-ready post configurations. Gate and access points are coordinated with the operator's security plan.
Railway perimeter fencingTrackside, depot and station perimeters for rail infrastructure using 358 and 2D 4/6/4 welded mesh, matched posts and access gates. Client-approved drawings are confirmed before production; suitable for high-speed rail corridors.- Military fencing and defensive barriersMilitary and restricted-site perimeters call for a clear distinction between the boundary and the protective barrier. A 358 anti-climb welded-mesh fence forms the perimeter with narrow openings, square posts set at the ends of each panel, and gates positioned for controlled access. Razor-wire topping can be specified where the site design requires it. The open mesh preserves sightlines along the fence for inspection and surveillance without turning the boundary into a solid wall. Separately, collapsible defensive barriers provide a modular protective element: each welded-mesh cell holds a geotextile liner inside the mesh, with sand or soil placed inside the liner on site. These are different products with different roles. Panel arrangement, gate positions, topping and barrier placement are confirmed against the project drawings and site requirements before quotation.